This is a new event cloned from an existing one. Please update the fields, like the time and description.

Changes

Changes feed

Show: All | Calagator::Events | Calagator::Sources | Calagator::Venues

Time Attribute with previous and current values
Change #35631
2015-08-17
17:20:43

update Calagator::Event 1250468920 PdxDevOps - Docker Docker Docker Roll back

Change #35630
2015-08-17
14:05:28

update Calagator::Event 1250468936 Women Who Hack Roll back

locked false → true
Change #35629
2015-08-17
13:57:44

update Calagator::Event 1250468936 Women Who Hack Roll back

end_time 2015-08-17 15:00:00 -0700 → 2015-08-23 17:00:00 -0700
start_time 2015-08-17 14:00:00 -0700 → 2015-08-23 13:00:00 -0700
Change #35628
2015-08-17
13:57:08

create Calagator::Event 1250468936 Women Who Hack Roll back

description nil → This will be a casual get together for women who want to hack on projects with or around other women. All types of projects (software and hardware), languages, platforms and experience levels are welcome. Remember, no experience is an experience level! Don't have anything to work on? Come, and we'll help you find a project! What you should bring: Your laptop or other equipment Yourself! We'll provide: the space, including lots of seating and tables internet some snacks, including gluten-free and vegan options. Our goal is to support local women hackers (and aspiring hackers) by providing a safe, welcoming environment in which you can connect with and learn from each other. We're kid-friendly, too, so feel free to bring your children with you. Women Who Hack is open to all women (cis & trans*) and genderqueer persons, as well as accompanied children of all genders. All participants of Women Who Hack agree to follow the Citizen Code of Conduct. Questions? Get in touch: [email protected]. Our Google Group is https://groups.google.com/forum/#!forum/women-who-hack.
end_time nil → 2015-08-17 15:00:00 -0700
id nil → 1250468936
start_time nil → 2015-08-17 14:00:00 -0700
title nil → Women Who Hack
url nil → http://womenwhohack.org
venue_id nil → 202394634
Change #35627
2015-08-17
10:48:41

destroy Calagator::Event 1250468935 test Roll back

Change #35626
2015-08-17
10:48:22

update Calagator::Venue 202395040 test Roll back

access_notes nil →
address nil → test
country nil → CA
description nil →
email nil →
events_count 1 → 0
latitude nil → 45.4428
locality nil → Ottawa
longitude nil → -75.6434
postal_code nil → K1K 4L2
region nil → ON
street_address nil → test
telephone nil →
url nil →
Change #35625
2015-08-17
10:48:13

create Calagator::Event 1250468935 test Roll back

description nil → est
end_time nil → 2015-08-18 12:00:00 -0700
id nil → 1250468935
start_time nil → 2015-08-18 11:00:00 -0700
title nil → test
url nil → http://testt
venue_details nil → test
venue_id nil → 202395040
Change #35624
2015-08-17
10:48:13

create Calagator::Venue 202395040 test Roll back

events_count nil → 1
id nil → 202395040
title nil → test
Change #35623
2015-08-17
10:43:35

update Calagator::Event 1250468934 Stories About Scaling Roll back

title Stories About Scaling → Food Bytes presents: Stories About Scaling featuring Jacobsen Salt Co, KURE, Supportland
Change #35622
2015-08-17
10:27:16

update Calagator::Venue 202395039 QuickLeft Roll back

access_notes nil →
address nil → 529 Southwest 3rd Avenue #200 , Portland, OR
country nil → US
description nil →
email nil →
events_count 1 → 2
latitude nil → 45.5193
locality nil → Portland
longitude nil → -122.6752
postal_code nil → 97204
region nil → OR
street_address nil → 529 Southwest 3rd Avenue
telephone nil →
url nil →
Change #35621
2015-08-17
10:27:03

update Calagator::Event 1250468934 Stories About Scaling Roll back

venue_id nil → 202395039
Change #35620
2015-08-17
10:27:03

create Calagator::Venue 202395039 QuickLeft Roll back

events_count nil → 1
id nil → 202395039
title nil → QuickLeft
Change #35619
2015-08-17
10:25:24

create Calagator::Event 1250468934 Stories About Scaling Roll back

description nil → As Portland grows in popularity and population, it’s no surprise that many of our startups and small businesses are burgeoning. Hear local entrepreneurs share stories about expanding their businesses. The panel will explore the benefits and challenges of using technology to create scale, expand audiences and support growth. <b>Panelists: </b> Nate Higgins, Co-Founder of KURE Ben Jacobsen, Founder of Jacobsen Salt Co. Katrina Scott di Carlo, Co-Founder of Supportland <b>Schedule: </b> 6:30 Doors open 6:45 Panel begins 7:30 Breakout discussions 8:30 Conversations & mingling Our Host: Quick Left builds web & mobile applications for companies that want to accelerate & elevate their dev teams.
end_time nil → 2015-08-26 21:00:00 -0700
id nil → 1250468934
start_time nil → 2015-08-26 18:30:00 -0700
title nil → Stories About Scaling
url nil → http://www.meetup.com/FoodBytes/events/223816346/
venue_details nil → RSVP through the meetup link for details
Change #35618
2015-08-17
10:02:13

update Calagator::Event 1250468933 Build Light, Test Hard. Growing Your Business with the Crowd Roll back

description This month we'll have Chris Justice leading a discussion on using the crowd/community to grow your business. Bio: Founding Team of Startups.co, Founder of The Startup GuysPassion: Helping founders build the right foundation to get to market more effectively → Portland SaaS Mastermind: This month we'll have Chris Justice leading a discussion on using the crowd/community to grow your business. Bio: Founding Team of Startups.co, Founder of The Startup GuysPassion: Helping founders build the right foundation to get to market more effectively
Change #35617
2015-08-17
10:01:47

update Calagator::Venue 202395038 Venture Business Centers Roll back

access_notes nil →
address nil → 707 SW Washington St, Portland, OR
country nil → US
description nil → 11th Floor Union Bank Building
email nil →
events_count 1 → 7
latitude nil → 45.521
locality nil → Portland
longitude nil → -122.6792
postal_code nil → 97205
region nil → OR
street_address nil → 707 Southwest Washington Street
telephone nil →
url nil →
Change #35616
2015-08-17
10:01:27

create Calagator::Event 1250468933 Build Light, Test Hard. Growing Your Business with the Crowd Roll back

description nil → This month we'll have Chris Justice leading a discussion on using the crowd/community to grow your business. Bio: Founding Team of Startups.co, Founder of The Startup GuysPassion: Helping founders build the right foundation to get to market more effectively
end_time nil → 2015-08-24 20:00:00 -0700
id nil → 1250468933
start_time nil → 2015-08-24 18:00:00 -0700
title nil → Build Light, Test Hard. Growing Your Business with the Crowd
url nil → http://www.meetup.com/Portland_SaaS/events/224659998/
venue_details nil → 11th Floor Union Bank Building
venue_id nil → 202395038
Change #35615
2015-08-17
10:01:26

create Calagator::Venue 202395038 Venture Business Centers Roll back

events_count nil → 1
id nil → 202395038
title nil → Venture Business Centers
Change #35614
2015-08-17
09:27:32

create Calagator::Event 1250468932 MaptimePDX - Community Q&A Roll back

description nil → This September, we're opening up the meetup to a Q&A format. Bring your questions and bring your knowledge. This is an ask-anything format so be ready to learn all the things. Beginner mappers welcome! As usual, doors open at 6p and we get started at 6:30p.
end_time nil → 2015-09-08 20:00:00 -0700
id nil → 1250468932
start_time nil → 2015-09-08 18:00:00 -0700
title nil → MaptimePDX - Community Q&A
url nil → http://www.meetup.com/MaptimePDX/events/224663444/?a=ra1_te
venue_id nil → 202394989
Change #35613
2015-08-16
11:25:48

create Calagator::Event 1250468931 Sunday Crafternoons at Ctrl-H Craft Lab Roll back

description nil → <p>Come spend an afternoon working on your favorite art or craft project in the Craft Lab at Ctrl-H Hackerspace.  Share your work in progress and get inspired by other artists and makers.  Bring your supplies, we have plenty of table space to spread out.  All skill levels and ages are welcome.  Parental supervision may be required. See you there!</p> <p><i>Note: If 5 or less people show up within the first 30 minutes, we may move over to the CTRLH Lounge next door (7608 N Interstate). In either case, if you have trouble finding us, head over to ctrlh.org/irc and ask!</i></p>
id nil → 1250468931
source_id nil → 996335406
start_time nil → 2015-08-16 14:00:00 -0700
title nil → Sunday Crafternoons at Ctrl-H Craft Lab
url nil → http://www.meetup.com/CTRL-H/events/224208248/
venue_id nil → 202395037
Change #35612
2015-08-16
11:25:48

update Calagator::Source 996335406 http://www.meetup.com/CTRL-H/events/224208248/ Roll back

Change #35611
2015-08-16
11:25:48

create Calagator::Source 996335406 http://www.meetup.com/CTRL-H/events/224208248/ Roll back

id nil → 996335406
url nil → http://www.meetup.com/CTRL-H/events/224208248/
Change #35610
2015-08-16
11:25:20

create Calagator::Event 1250468930 Knit Night at the Craft Lab Roll back

description nil → <p>Come join us for an evening of creativity working on your favorite stitching or craft project in the Craft Lab at Ctrl-H Hackerspace.  </p> <p>Share your work in progress and get inspired by other artists and makers. Knitting, crocheting, weaving, sewing, and all other various forms of stitchery and craft are welcome.    We have some communal supplies to share for those just starting out like yarn, thread, embroidery floss and various types of needles. Let's share our skills with others while carving out a little time during the week to work on a special project.  All ages and abilities are encouraged.  See you there! </p> <p><i>Note: If 5 or less people show up within the first 30 minutes, we may move over to the CTRLH Lounge next door (7608 N Interstate). In either case, if you have trouble finding us, head over to ctrlh.org/irc and ask!</i></p>
id nil → 1250468930
source_id nil → 996335405
start_time nil → 2015-08-19 19:00:00 -0700
title nil → Knit Night at the Craft Lab
url nil → http://www.meetup.com/CTRL-H/events/224620099/
venue_id nil → 202395037
Change #35609
2015-08-16
11:25:20

create Calagator::Venue 202395037 CTRLH - Craft Lab Roll back

country nil → us
events_count nil → 4
id nil → 202395037
latitude nil → 45.5781
locality nil → Portland
longitude nil → -122.682
postal_code nil → 97217
region nil → OR
source_id nil → 996335405
street_address nil → 7614 N Interstate Ave
title nil → CTRLH - Craft Lab
Change #35608
2015-08-16
11:25:19

update Calagator::Source 996335405 http://www.meetup.com/CTRL-H/events/224620099/ Roll back

Change #35607
2015-08-16
11:25:19

create Calagator::Source 996335405 http://www.meetup.com/CTRL-H/events/224620099/ Roll back

id nil → 996335405
url nil → http://www.meetup.com/CTRL-H/events/224620099/
Change #35606
2015-08-16
11:24:58

update Calagator::Event 1250468929 Software Defined Radio (SDR) @ CTRLH Roll back

end_time nil → 2015-08-17 20:00:00 -0700
title Software Defined Radio (SDR) @ CTRLH → Software Defined Radio (SDR)
venue_details nil →
Change #35605
2015-08-16
11:24:30

create Calagator::Event 1250468929 Software Defined Radio (SDR) @ CTRLH Roll back

description nil → <p>All things SDR! Show up and transceive with friends.</p>
id nil → 1250468929
source_id nil → 996335404
start_time nil → 2015-08-17 19:00:00 -0700
title nil → Software Defined Radio (SDR) @ CTRLH
url nil → http://www.meetup.com/CTRL-H/events/224387998/
venue_id nil → 202394867
Change #35604
2015-08-16
11:24:29

update Calagator::Source 996335404 http://www.meetup.com/CTRL-H/events/224387998/ Roll back

Change #35603
2015-08-16
11:24:29

create Calagator::Source 996335404 http://www.meetup.com/CTRL-H/events/224387998/ Roll back

id nil → 996335404
url nil → http://www.meetup.com/CTRL-H/events/224387998/
Change #35602
2015-08-16
11:23:53

create Calagator::Event 1250468928 CTRL-H Open House Roll back

description nil → <p>Thursdays are open house night here at CTRL-H. This is when members gather and can open the door for you. We know we can be there by 7:00PM, but most of the time we are hours early. We don't have an opening ceremony or any formal meeting. This is a time for you to eavesdrop on other peoples projects and get support on a project that you may need help with. Bring your inventions, your technical toys and your broken microwave to CTRL-H and Hack with friends.</p>
end_time nil → 2015-08-20 20:00:00 -0700
id nil → 1250468928
start_time nil → 2015-08-20 19:00:00 -0700
title nil → CTRL-H Open House
url nil → http://www.meetup.com/CTRL-H/events/224468735/
venue_id nil → 202394867
Change #35601
2015-08-15
16:57:05

create Calagator::Event 1250468927 eBay Tech Tuesdays: Accessibility Part 2: Designing for People with Disabilities Roll back

description nil → Our August Tech Tuesday on the 25th will be the second part of our two-part series on accessibility for people with disabilities. As mentioned at the June Meetup, this second evening of conversations will be focused on accessibility as it pertains to developing technologies, websites, apps, and more. We’re lucky enough to be hearing from Megan Lawrence from Cognito again. (If you were here in June, she was the speaker who opened the evening talking about her experiences with her post-doctorate advisor who was blind.) Megan’s specialty is accessibility and universal design. She will speaking on designing products, services, and technology for people with disabilities. Our second speaker has yet to be confirmed. This event will be updated as soon as they are secured. If you’re involved in product or technology development on any level, you'll definitely benefit from the knowledge and experience our presenters will be sharing. As usual, doors open at 5:45pm and we’ll have pizza & sodas for you. Presentation starts at 6:30pm. We look forward to seeing you!
end_time nil → 2015-08-25 20:00:00 -0700
id nil → 1250468927
start_time nil → 2015-08-25 18:30:00 -0700
title nil → eBay Tech Tuesdays: Accessibility Part 2: Designing for People with Disabilities
url nil → http://www.meetup.com/eBay-Tech-Tuesdays/events/224619944/?a=ra1_te
venue_id nil → 202394689
Change #35600
2015-08-15
09:47:38

create Calagator::Event 1250468926 Consider "The Open Source Writing Stack" Roll back

description nil → Open source makes writing and publishing much easier both online and in print — provided you know what tools to use. This talk covers those tools (from LaTeX to WordPress) and how to choose between them. Open source tools for writing and publishing (both online and in print) continue to improve. This talk will blast through options for writing, publishing, and getting feedback — and discuss what you should care about when you’re writing. Does the GPL license on WordPress matter? What about a tool’s ability to handle Markdown? Perhaps most importantly, this talk will also cover when tools and stack questions can get in the way of actually writing. ******************* Our speaker for this meetup is Thursday Bram, who writes about technical topics of all sorts. She’s the co-founder of Urgency Inc, a technical marketing agency. Thursday gave this talk during the Open Source Bridge conference back in June.
end_time nil → 2015-09-08 20:00:00 -0700
id nil → 1250468926
start_time nil → 2015-09-08 18:00:00 -0700
title nil → Consider "The Open Source Writing Stack"
url nil → http://www.meetup.com/Write-The-Docs-PDX/events/224647846/
venue_details nil → Go to the US Bank Office Building ("The Big Pink") Take the elevator to the 29th floor (Just below Portland City Grill).
venue_id nil → 202392091
Change #35599
2015-08-14
15:31:12

update Calagator::Event 1250468920 PdxDevOps - Docker Docker Docker Roll back

description Join us for the August meeting of PdxDevOps. We have something for everyone tonight with one talk focused on beginners and one talk focused on experts. Sean Kane from New Relic will be giving his 2014 Velocity talk "Docker in Production" (expert level). Rex Addiscentis ‏will be giving a general introduction to DevOps, followed by a demo/tutorial of simple application deployment with Docker on AWS. (beginner level). New Relic is continuing to host us and Volt is continuing to provide pizza. Gluten Free options will be available. Contact Spencer if you have any specific requests. pdxdevops is a Portland, Oregon user group that explores the glorious intersection of software development and systems operations, and shares practical advice on working effectively in an era of agile infrastructure, server automation and cloud computing. The group welcomes participants interested in any related products, technologies and methodologies. The group has been meeting regularly since August 2010 for presentations, demos and discussions applicable to all skill levels, from newbies and experts. Every month 15-35 people come together to share their knowledge, projects and enthusiasm for devops – join us! → Join us for the August meeting of PdxDevOps. We have something for everyone tonight with one talk focused on beginners and one talk focused on experts. Sean Kane from New Relic will be giving his 2014 Velocity talk "Docker in Production" (expert level). Rex Addiscentis ‏will be giving a general introduction to DevOps, followed by a demo/tutorial of simple application deployment with Docker on AWS. (beginner level). For more information, see https://groups.google.com/forum/#!topic/pdxdevops/1q3XaQawJnI New Relic is continuing to host us and Volt is continuing to provide pizza. Gluten Free options will be available. Contact Spencer if you have any specific requests. pdxdevops is a Portland, Oregon user group that explores the glorious intersection of software development and systems operations, and shares practical advice on working effectively in an era of agile infrastructure, server automation and cloud computing. The group welcomes participants interested in any related products, technologies and methodologies. The group has been meeting regularly since August 2010 for presentations, demos and discussions applicable to all skill levels, from newbies and experts. Every month 15-35 people come together to share their knowledge, projects and enthusiasm for devops – join us!
Change #35598
2015-08-14
14:47:13

update Calagator::Event 1250468920 PdxDevOps - Docker Docker Docker Roll back

description Join us for the August meeting of PdxDevOps. We have something for everyone tonight with one talk focused on beginners and one talk focused on experts. Sean Kane from New Relic will be giving his 2014 Velocity talk "Docker in Production" (expert level). Rex Addiscentis ‏will be giving a general introduction to DevOps, followed by a demo/tutorial of simple application deployment with Docker on AWS. (beginner level). For more information on Rex's presentation, visit this Calagator event page, http://calagator.org/events/1250468925. New Relic is continuing to host us and Volt is continuing to provide pizza. Gluten Free options will be available. Contact Spencer if you have any specific requests. pdxdevops is a Portland, Oregon user group that explores the glorious intersection of software development and systems operations, and shares practical advice on working effectively in an era of agile infrastructure, server automation and cloud computing. The group welcomes participants interested in any related products, technologies and methodologies. The group has been meeting regularly since August 2010 for presentations, demos and discussions applicable to all skill levels, from newbies and experts. Every month 15-35 people come together to share their knowledge, projects and enthusiasm for devops – join us! → Join us for the August meeting of PdxDevOps. We have something for everyone tonight with one talk focused on beginners and one talk focused on experts. Sean Kane from New Relic will be giving his 2014 Velocity talk "Docker in Production" (expert level). Rex Addiscentis ‏will be giving a general introduction to DevOps, followed by a demo/tutorial of simple application deployment with Docker on AWS. (beginner level). New Relic is continuing to host us and Volt is continuing to provide pizza. Gluten Free options will be available. Contact Spencer if you have any specific requests. pdxdevops is a Portland, Oregon user group that explores the glorious intersection of software development and systems operations, and shares practical advice on working effectively in an era of agile infrastructure, server automation and cloud computing. The group welcomes participants interested in any related products, technologies and methodologies. The group has been meeting regularly since August 2010 for presentations, demos and discussions applicable to all skill levels, from newbies and experts. Every month 15-35 people come together to share their knowledge, projects and enthusiasm for devops – join us!
Change #35597
2015-08-14
14:35:28

destroy Calagator::Event 1250468925 PdxDevOps - Introduction To DevOps For Web Developers Roll back

Change #35596
2015-08-14
13:02:09

update Calagator::Event 1250468920 PdxDevOps - Docker Docker Docker Roll back

description Join us for the August meeting of PdxDevOps. We have something for everyone tonight with one talk focused on beginners and one talk focused on experts. Sean Kane from New Relic will be giving his 2014 Velocity talk "Docker in Production" (expert level). Rex Addiscentis ‏will be giving a demo/tutorial of simple application deployment with Docker on AWS. (beginner level). For more information on Rex's presentation, visit this Calagator event page, http://calagator.org/events/1250468925. New Relic is continuing to host us and Volt is continuing to provide pizza. Gluten Free options will be available. Contact Spencer if you have any specific requests. pdxdevops is a Portland, Oregon user group that explores the glorious intersection of software development and systems operations, and shares practical advice on working effectively in an era of agile infrastructure, server automation and cloud computing. The group welcomes participants interested in any related products, technologies and methodologies. The group has been meeting regularly since August 2010 for presentations, demos and discussions applicable to all skill levels, from newbies and experts. Every month 15-35 people come together to share their knowledge, projects and enthusiasm for devops – join us! → Join us for the August meeting of PdxDevOps. We have something for everyone tonight with one talk focused on beginners and one talk focused on experts. Sean Kane from New Relic will be giving his 2014 Velocity talk "Docker in Production" (expert level). Rex Addiscentis ‏will be giving a general introduction to DevOps, followed by a demo/tutorial of simple application deployment with Docker on AWS. (beginner level). For more information on Rex's presentation, visit this Calagator event page, http://calagator.org/events/1250468925. New Relic is continuing to host us and Volt is continuing to provide pizza. Gluten Free options will be available. Contact Spencer if you have any specific requests. pdxdevops is a Portland, Oregon user group that explores the glorious intersection of software development and systems operations, and shares practical advice on working effectively in an era of agile infrastructure, server automation and cloud computing. The group welcomes participants interested in any related products, technologies and methodologies. The group has been meeting regularly since August 2010 for presentations, demos and discussions applicable to all skill levels, from newbies and experts. Every month 15-35 people come together to share their knowledge, projects and enthusiasm for devops – join us!
Change #35595
2015-08-14
12:59:41

update Calagator::Event 1250468920 PdxDevOps - Docker Docker Docker Roll back

description Join us for the August meeting of PdxDevOps. We have something for everyone tonight with one talk focused on beginners and one talk focused on experts. Sean Kane from New Relic will be giving his 2014 Velocity talk "Docker in Production" (expert level) Rex Addiscentis ‏will be giving a demo/tutorial of simple application deployment with Docker on AWS. (beginner level) New Relic is continuing to host us and Volt is continuing to provide pizza. Gluten Free options will be available. Contact Spencer if you have any specific requests. pdxdevops is a Portland, Oregon user group that explores the glorious intersection of software development and systems operations, and shares practical advice on working effectively in an era of agile infrastructure, server automation and cloud computing. The group welcomes participants interested in any related products, technologies and methodologies. The group has been meeting regularly since August 2010 for presentations, demos and discussions applicable to all skill levels, from newbies and experts. Every month 15-35 people come together to share their knowledge, projects and enthusiasm for devops – join us! → Join us for the August meeting of PdxDevOps. We have something for everyone tonight with one talk focused on beginners and one talk focused on experts. Sean Kane from New Relic will be giving his 2014 Velocity talk "Docker in Production" (expert level). Rex Addiscentis ‏will be giving a demo/tutorial of simple application deployment with Docker on AWS. (beginner level). For more information on Rex's presentation, visit this Calagator event page, http://calagator.org/events/1250468925. New Relic is continuing to host us and Volt is continuing to provide pizza. Gluten Free options will be available. Contact Spencer if you have any specific requests. pdxdevops is a Portland, Oregon user group that explores the glorious intersection of software development and systems operations, and shares practical advice on working effectively in an era of agile infrastructure, server automation and cloud computing. The group welcomes participants interested in any related products, technologies and methodologies. The group has been meeting regularly since August 2010 for presentations, demos and discussions applicable to all skill levels, from newbies and experts. Every month 15-35 people come together to share their knowledge, projects and enthusiasm for devops – join us!
Change #35594
2015-08-14
12:56:17

create Calagator::Venue 202395036 Business Design Lab Roll back

access_notes nil → The space is on the second floor with no elevator.
address nil → 4755 SW Watson Ave, Suite 200, Beaverton, Or 97007
country nil → US
description nil → Business Design Lab is about 1600 sq feet of open space with two adjoining conference rooms. The space is used as a co-working style office space. Its furnished with several desks, work tables, and 25 office chairs. More than 25 people can easily fit with temporary chairs or standing. Parking is easy with 8 onsite spaces and lots of street parking. Walking distance to the Max, Ava Roasteria, restaurants, and the Beaverton Library.
email nil → [email protected]
events_count nil → 1
id nil → 202395036
latitude nil → 45.4855
locality nil → Beaverton
longitude nil → -122.8068
postal_code nil → 97005
region nil → OR
street_address nil → 4755 Southwest Watson Avenue
telephone nil → (503) 482-9181
title nil → Business Design Lab
url nil → http://www.VestaIgnite.com
wifi nil → true
Change #35593
2015-08-14
12:53:35

create Calagator::Event 1250468925 PdxDevOps - Introduction To DevOps For Web Developers Roll back

description nil → Title Introduction To DevOps For Web Developers - A description and demonstration, emphasizing Docker, including a Docker container deployment to Amazon Web Services. TL;DR A two-part presentation. 1) High-level introduction to DevOps what, why, and how. 2) A scripted sprint through the process of building a trivial web page, (along with its Apache HTTP server), into a Docker container, and then deploying that container to Amazon Web Services. About This Presentation A large number of Web applications companies are embracing strategies and techniques often referred to by the umbrella-term "DevOps". That number of companies will only grow. It is just a matter of time before you as a developer will be using those techniques, implementing those strategies. As a software developer, you need to be productive quickly when you join projects which use DevOps techniques. This presentation is a heads-up, a brief introduction to some of those techniques. Deploying reliable Web applications and their updates, reliably and frequently, is a "hard problem". One strategy aimed at reducing the difficulty of deploying Web application software and its updates is named Microservices Architecture. Microservices Architecture is a strategy and analysis-design concept, not an implementation. A software technology which lends itself well to implementing Microservices Architecture is "containers". There are many kinds of containers. Docker is one of the container technologies. But, Docker is not just a container, it is much more. When you understand HOW you can use Docker for project development, you will understand WHY many companies are now, or will be, using Docker. The presentation is comprised of two parts. The first part is a very brief introduction to DevOps, Microservices Architecture, Docker, and Amazon Web Services (AWS). The second part is a live demo of how to use Docker to deploy a very simple PHP web app to AWS. We will go from "Zero to AWS" of a "Hello World" web page, live demonstrating the following: * Install Docker on a Linux box * Create a simple web app, (a "Hello World" website), consisting of one container * Perform simple tests to verify its operation * Deploy our "Hello World" website to an Amazon Web Services EC2 instance * Perform a simple test of the AWS deploy Intended Audience, Pre-requisites: The example web page uses trivial PHP code, but, the principles described and the demo are applicable to any programming language. Pre-requisites for understanding this presentation are knowledge of: * Basic computer concepts, such as CPU, memory, and storage * Basic Linux OS concepts and some common Bash commands * Basic Web technology, networks fundamentals, and client-server concept * Trivial HTML and PHP About Rex Addiscentis Rex has developed hardware and software for applications in communications, business, and SCADA. In addition to programming, Rex has managed teams of programmers. Programming languages used include high level languages and assembly languages. Delivery ecosystems include Web, native hardware, Linux, and Windows. Rex's current focus is to continue learning and teaching "The Way of DevOps". About PdxDevOps New Relic is continuing to host us and Volt is continuing to provide pizza. Gluten Free options will be available. Contact Spencer if you have any specific requests. pdxdevops is a Portland, Oregon user group that explores the glorious intersection of software development and systems operations, and shares practical advice on working effectively in an era of agile infrastructure, server automation and cloud computing. The group welcomes participants interested in any related products, technologies and methodologies. The group has been meeting regularly since August 2010 for presentations, demos and discussions applicable to all skill levels, from newbies and experts. Every month 15-35 people come together to share their knowledge, projects and enthusiasm for devops – join us!
end_time nil → 2015-08-17 20:30:00 -0700
id nil → 1250468925
start_time nil → 2015-08-17 18:30:00 -0700
title nil → PdxDevOps - Introduction To DevOps For Web Developers
venue_details nil → For more details, see http://calagator.org/events/1250468920
venue_id nil → 202392091
Change #35592
2015-08-14
11:59:08

create Calagator::Event 1250468924 OpenStack PDX September - Open SDN Panel Roll back

description nil → This September we will host speakers from three leading open source SDN solutions that work beautifully with OpenStack - Midonet, Akanda and OpenDaylight Each speaker will get a little time to cover their platform architecture, followed by a moderated panel discussion including questions from attendees.
end_time nil → 2015-09-17 20:00:00 -0700
id nil → 1250468924
start_time nil → 2015-09-17 18:00:00 -0700
title nil → OpenStack PDX September - Open SDN Panel
url nil → http://www.meetup.com/openstack-pdx/events/224572482/
venue_id nil → 202393539
Change #35591
2015-08-14
11:36:36

create Calagator::Event 1250468923 Demystifying test.check w/ Justin Holguin Roll back

description nil → Clojure's test.check library for generative testing is something that a lot of people talk about, but relatively few actually use. Lots of people, myself included, find that test.check's Haskell origins make it more than a bit alienating at first, and dealing with that unfamiliarity while adopting a new testing paradigm is a lot to ask. In this short talk, I'll discuss ways of approaching generative testing in Clojure and show how generators are composed of small, simple parts. I'll also demonstrate my own library based on test.check, jen, which makes it even easier to write generators for typical Clojure data types. Bio: Justin Holguín is a full-time Clojure developer at Puppet Labs who enjoys experimenting with new ways to write, find, and fix bugs.
end_time nil → 2015-09-03 21:00:00 -0700
id nil → 1250468923
start_time nil → 2015-09-03 18:00:00 -0700
title nil → Demystifying test.check w/ Justin Holguin
url nil → http://www.meetup.com/clojure-pdx/events/224522942/
venue_details nil → 5th floor
venue_id nil → 202393539
Change #35590
2015-08-14
10:05:31

update Calagator::Event 1250468920 PdxDevOps - Stream Processing with Heka Roll back

description Join us for the August meeting of PdxDevOps New Relic is continuing to host us and Volt is continuing to provide pizza. Gluten Free options will be available. Contact Spencer if you have any specific requests. pdxdevops is a Portland, Oregon user group that explores the glorious intersection of software development and systems operations, and shares practical advice on working effectively in an era of agile infrastructure, server automation and cloud computing. The group welcomes participants interested in any related products, technologies and methodologies. The group has been meeting regularly since August 2010 for presentations, demos and discussions applicable to all skill levels, from newbies and experts. Every month 15-35 people come together to share their knowledge, projects and enthusiasm for devops – join us! → Join us for the August meeting of PdxDevOps. We have something for everyone tonight with one talk focused on beginners and one talk focused on experts. Sean Kane from New Relic will be giving his 2014 Velocity talk "Docker in Production" (expert level) Rex Addiscentis ‏will be giving a demo/tutorial of simple application deployment with Docker on AWS. (beginner level) New Relic is continuing to host us and Volt is continuing to provide pizza. Gluten Free options will be available. Contact Spencer if you have any specific requests. pdxdevops is a Portland, Oregon user group that explores the glorious intersection of software development and systems operations, and shares practical advice on working effectively in an era of agile infrastructure, server automation and cloud computing. The group welcomes participants interested in any related products, technologies and methodologies. The group has been meeting regularly since August 2010 for presentations, demos and discussions applicable to all skill levels, from newbies and experts. Every month 15-35 people come together to share their knowledge, projects and enthusiasm for devops – join us!
title PdxDevOps - Stream Processing with Heka → PdxDevOps - Docker Docker Docker
Change #35589
2015-08-14
09:30:31

update Calagator::Event 1250468922 3D Modeling and Printing Workshop Series Roll back

Change #35588
2015-08-14
09:29:41

update Calagator::Event 1250468922 3D Modeling and Printing Workshop Series Roll back

description Sign up now, this event has a very limited number of spots! Registration for this event includes all three workshop sessions. You can register for the event via <a href="https://www.eventbrite.com/e/3d-modeling-and-printing-workshop-series-tickets-18089092964">Eventbrite</a>. <b>Come to ChickTech’s 3D Printing workshop</b> to get the skills you need to start making 3D models on your own! For three Tuesday evenings in a row, you will be led by an experienced design instructor and focus on building a basic skill set for 3D printing design. Best of all, you'll get to print each session’s project in one of five plastic colors to keep! Technology that will be used: Autodesk Fusion360 and 3D Printers <b>The Instructor: 3D printing designer Mazuir Ross (Maz)</b> Maz sculpted the <a href="http://www.oregonlive.com/multimedia/index.ssf/2015/05/portland_3d_printing_meetup_gr.html">3D printed cow Veronin for Urban Farmer PDX</a>! To learn more about the designer check out her website at <a href="http://www.mazuirross.com/">mazuirross.com</a>. She is also in partnership with Attero, who focuses on the hardware side of 3D printing. You can find information about Maz and Attero’s operation at mazandattero.xyz. <b>Session 1, August 25th: Make a Custom Charm</b> The first session will overview the basics needed for successfully designing 3D printing output, particularly FFF/FDM printing. In the lesson we will create a snap-on custom charm for beer bottles/wine glasses. The creation of the snap-on charm will focus on basics of sketching and creating geometry from sketches. You'll be able to put a word or name on the charm, or even make flowers and/or geometric shapes! <b>Session 2, September 1st: Make a Trinket Box</b> The second session is about modeling a trinket box with a lid. The session will focus on the combining/subtracting and/or intersecting of geometry for modeling. We'll also focus on the concept of fitting tolerances needed for CAM/CNC fabrication, particularly 3D printing. <b>Session 3 September 8th: Make a Six-Panel Hinged Cube with Custom Panel Design</b> In the third session, you'll model a 6-panel hinged cube, including learning how to create fitted hinges. You'll also get creative with the custom designs on each panel. This folding cube can be designed with a sports team logo, a company name, anything you want. It can also be made into a desk trinket to hold pencils/pens/stylus just by cutting out a hole on the top panel. ------------------------------------ <b>By the end of this workshop series</b> you'll have a comprehensive understanding of 3D printing, 3D modeling software, and 3D design. Part of ChickTech’s mission is to retain women in technology. We intend for this event to build community and add skills to resumes. We encourage anyone who has always wanted to get started with 3D Printing to register for this event! <b>Dates:</b> Aug 25, Sept 1, Sept 8 <b>Time:</b> 5:45pm-8pm (Doors open at 5:30pm and close at 8:30pm, we encourage you to come early and stay late!) <b>Location:</b> Uncorked Studios 1001 SE Water Ave #350 Portland, OR 97214 Registration pays for dinner for all three evenings, along with the class costs. Any amount left over supports ChickTech: High School. A big thank you to our sponsor and event location provider, Uncorked Studios! ChickTech: Career events are open to all genders with a focus on women. → Sign up now, this event has a very limited number of spots! Registration for this event includes all three workshop sessions. You can register for the event via <a href="https://www.eventbrite.com/e/3d-modeling-and-printing-workshop-series-tickets-18089092964">Eventbrite</a>. <b>Come to ChickTech’s 3D Printing workshop</b> to get the skills you need to start making 3D models on your own! For three Tuesday evenings in a row, you will be led by an experienced design instructor and focus on building a basic skill set for 3D printing design. Best of all, you'll get to print each session’s project in one of five plastic colors to keep! <b>Technology that will be used:</b> Autodesk Fusion360 and 3D Printers <b>The Instructor: 3D printing designer Mazuir Ross (Maz)</b> Maz sculpted the <a href="http://www.oregonlive.com/multimedia/index.ssf/2015/05/portland_3d_printing_meetup_gr.html">3D printed cow Veronin for Urban Farmer PDX</a>! To learn more about the designer check out her website at <a href="http://www.mazuirross.com/">mazuirross.com</a>. She is also in partnership with Attero, who focuses on the hardware side of 3D printing. You can find information about Maz and Attero’s operation at mazandattero.xyz. <b>Session 1, August 25th: Make a Custom Charm</b> The first session will overview the basics needed for successfully designing 3D printing output, particularly FFF/FDM printing. In the lesson we will create a snap-on custom charm for beer bottles/wine glasses. The creation of the snap-on charm will focus on basics of sketching and creating geometry from sketches. You'll be able to put a word or name on the charm, or even make flowers and/or geometric shapes! <b>Session 2, September 1st: Make a Trinket Box</b> The second session is about modeling a trinket box with a lid. The session will focus on the combining/subtracting and/or intersecting of geometry for modeling. We'll also focus on the concept of fitting tolerances needed for CAM/CNC fabrication, particularly 3D printing. <b>Session 3 September 8th: Make a Six-Panel Hinged Cube with Custom Panel Design</b> In the third session, you'll model a 6-panel hinged cube, including learning how to create fitted hinges. You'll also get creative with the custom designs on each panel. This folding cube can be designed with a sports team logo, a company name, anything you want. It can also be made into a desk trinket to hold pencils/pens/stylus just by cutting out a hole on the top panel. ------------------------------------ <b>By the end of this workshop series</b> you'll have a comprehensive understanding of 3D printing, 3D modeling software, and 3D design. Part of ChickTech’s mission is to retain women in technology. We intend for this event to build community and add skills to resumes. We encourage anyone who has always wanted to get started with 3D Printing to register for this event! <b>Dates:</b> Aug 25, Sept 1, Sept 8 <b>Time:</b> 5:45pm-8pm (Doors open at 5:30pm and close at 8:30pm, we encourage you to come early and stay late!) <b>Location:</b> Uncorked Studios 1001 SE Water Ave #350 Portland, OR 97214 Registration pays for dinner for all three evenings, along with the class costs. Any amount left over supports ChickTech: High School. A big thank you to our sponsor and event location provider, Uncorked Studios! ChickTech: Career events are open to all genders with a focus on women.
Change #35587
2015-08-14
09:28:55

update Calagator::Event 1250468922 3D Modeling and Printing Workshop Series Roll back

description Sign up now, this event has a very limited number of spots! Registration for this event includes all three workshop sessions. You can register for the event via <a href="https://www.eventbrite.com/e/3d-modeling-and-printing-workshop-series-tickets-18089092964">Eventbrite</a> <b>Come to ChickTech’s 3D Printing workshop</b> to get the skills you need to start making 3D models on your own! For three Tuesday evenings in a row, you will be led by an experienced design instructor and focus on building a basic skill set for 3D printing design. Best of all, you'll get to print each session’s project in one of five plastic colors to keep! Technology that will be used: Autodesk Fusion360 and 3D Printers <b>The Instructor: 3D printing designer Mazuir Ross (Maz)</b> Maz sculpted the <a href="http://www.oregonlive.com/multimedia/index.ssf/2015/05/portland_3d_printing_meetup_gr.html">3D printed cow Veronin for Urban Farmer PDX</a>! To learn more about the designer check out her website at <a href="http://www.mazuirross.com/">mazuirross.com</a>. She is also in partnership with Attero, who focuses on the hardware side of 3D printing. You can find information about Maz and Attero’s operation at mazandattero.xyz. <b>Session 1, August 25th: Make a Custom Charm</b> The first session will overview the basics needed for successfully designing 3D printing output, particularly FFF/FDM printing. In the lesson we will create a snap-on custom charm for beer bottles/wine glasses. The creation of the snap-on charm will focus on basics of sketching and creating geometry from sketches. You'll be able to put a word or name on the charm, or even make flowers and/or geometric shapes! <b>Session 2, September 1st: Make a Trinket Box</b> The second session is about modeling a trinket box with a lid. The session will focus on the combining/subtracting and/or intersecting of geometry for modeling. We'll also focus on the concept of fitting tolerances needed for CAM/CNC fabrication, particularly 3D printing. <b>Session 3 September 8th: Make a Six-Panel Hinged Cube with Custom Panel Design</b> In the third session, you'll model a 6-panel hinged cube, including learning how to create fitted hinges. You'll also get creative with the custom designs on each panel. This folding cube can be designed with a sports team logo, a company name, anything you want. It can also be made into a desk trinket to hold pencils/pens/stylus just by cutting out a hole on the top panel. ------------------------------------ <b>By the end of this workshop series</b> you'll have a comprehensive understanding of 3D printing, 3D modeling software, and 3D design. Part of ChickTech’s mission is to retain women in technology. We intend for this event to build community and add skills to resumes. We encourage anyone who has always wanted to get started with 3D Printing to register for this event! <b>Dates:</b> Aug 25, Sept 1, Sept 8 <b>Time:</b> 5:45pm-8pm (Doors open at 5:30pm and close at 8:30pm, we encourage you to come early and stay late!) <b>Location:</b> Uncorked Studios 1001 SE Water Ave #350 Portland, OR 97214 Registration pays for dinner for all three evenings, along with the class costs. Any amount left over supports ChickTech: High School. A big thank you to our sponsor and event location provider, Uncorked Studios! ChickTech: Career events are open to all genders with a focus on women. → Sign up now, this event has a very limited number of spots! Registration for this event includes all three workshop sessions. You can register for the event via <a href="https://www.eventbrite.com/e/3d-modeling-and-printing-workshop-series-tickets-18089092964">Eventbrite</a>. <b>Come to ChickTech’s 3D Printing workshop</b> to get the skills you need to start making 3D models on your own! For three Tuesday evenings in a row, you will be led by an experienced design instructor and focus on building a basic skill set for 3D printing design. Best of all, you'll get to print each session’s project in one of five plastic colors to keep! Technology that will be used: Autodesk Fusion360 and 3D Printers <b>The Instructor: 3D printing designer Mazuir Ross (Maz)</b> Maz sculpted the <a href="http://www.oregonlive.com/multimedia/index.ssf/2015/05/portland_3d_printing_meetup_gr.html">3D printed cow Veronin for Urban Farmer PDX</a>! To learn more about the designer check out her website at <a href="http://www.mazuirross.com/">mazuirross.com</a>. She is also in partnership with Attero, who focuses on the hardware side of 3D printing. You can find information about Maz and Attero’s operation at mazandattero.xyz. <b>Session 1, August 25th: Make a Custom Charm</b> The first session will overview the basics needed for successfully designing 3D printing output, particularly FFF/FDM printing. In the lesson we will create a snap-on custom charm for beer bottles/wine glasses. The creation of the snap-on charm will focus on basics of sketching and creating geometry from sketches. You'll be able to put a word or name on the charm, or even make flowers and/or geometric shapes! <b>Session 2, September 1st: Make a Trinket Box</b> The second session is about modeling a trinket box with a lid. The session will focus on the combining/subtracting and/or intersecting of geometry for modeling. We'll also focus on the concept of fitting tolerances needed for CAM/CNC fabrication, particularly 3D printing. <b>Session 3 September 8th: Make a Six-Panel Hinged Cube with Custom Panel Design</b> In the third session, you'll model a 6-panel hinged cube, including learning how to create fitted hinges. You'll also get creative with the custom designs on each panel. This folding cube can be designed with a sports team logo, a company name, anything you want. It can also be made into a desk trinket to hold pencils/pens/stylus just by cutting out a hole on the top panel. ------------------------------------ <b>By the end of this workshop series</b> you'll have a comprehensive understanding of 3D printing, 3D modeling software, and 3D design. Part of ChickTech’s mission is to retain women in technology. We intend for this event to build community and add skills to resumes. We encourage anyone who has always wanted to get started with 3D Printing to register for this event! <b>Dates:</b> Aug 25, Sept 1, Sept 8 <b>Time:</b> 5:45pm-8pm (Doors open at 5:30pm and close at 8:30pm, we encourage you to come early and stay late!) <b>Location:</b> Uncorked Studios 1001 SE Water Ave #350 Portland, OR 97214 Registration pays for dinner for all three evenings, along with the class costs. Any amount left over supports ChickTech: High School. A big thank you to our sponsor and event location provider, Uncorked Studios! ChickTech: Career events are open to all genders with a focus on women.
end_time 2015-08-25 20:00:00 -0700 → 2015-08-25 20:30:00 -0700
Change #35586
2015-08-14
09:27:45

update Calagator::Event 1250468922 3D Modeling and Printing Workshop Series Roll back

description Sign up now, this event has a very limited number of spots! <b>Come to ChickTech’s 3D Printing workshop</b> to get the skills you need to start making 3D models on your own! For three Tuesday evenings in a row, you will be led by an experienced design instructor and focus on building a basic skill set for 3D printing design. Best of all, you'll get to print each session’s project in one of five plastic colors to keep! Technology that will be used: <a href="http://www.autodesk.com/products/fusion-360/overview">Autodesk Fusion360</a> and 3D Printers <b>The Instructor: 3D printing designer Mazuir Ross (Maz)</b> Maz sculpted the <a href="http://www.oregonlive.com/multimedia/index.ssf/2015/05/portland_3d_printing_meetup_gr.html">3D printed cow Veronin for Urban Farmer PDX</a>! To learn more about the designer check out her website at <a href="http://www.mazuirross.com/">mazuirross.com</a>. She is also in partnership with Attero, who focuses on the hardware side of 3D printing. You can find information about Maz and Attero’s operation at mazandattero.xyz. <b>Session 1, August 25th: Make a Custom Charm</b> The first session will overview the basics needed for successfully designing 3D printing output, particularly FFF/FDM printing. In the lesson we will create a snap-on custom charm for beer bottles/wine glasses. The creation of the snap-on charm will focus on basics of sketching and creating geometry from sketches. You'll be able to put a word or name on the charm, or even make flowers and/or geometric shapes! <b>Session 2, September 1st: Make a Trinket Box</b> The second session is about modeling a trinket box with a lid. The session will focus on the combining/subtracting and/or intersecting of geometry for modeling. We'll also focus on the concept of fitting tolerances needed for CAM/CNC fabrication, particularly 3D printing. <b>Session 3 September 8th: Make a Six-Panel Hinged Cube with Custom Panel Design</b> In the third session, you'll model a 6-panel hinged cube, including learning how to create fitted hinges. You'll also get creative with the custom designs on each panel. This folding cube can be designed with a sports team logo, a company name, anything you want. It can also be made into a desk trinket to hold pencils/pens/stylus just by cutting out a hole on the top panel. ------------------------------------ <b>By the end of this workshop series</b> you'll have a comprehensive understanding of 3D printing, 3D modeling software, and 3D design. Part of ChickTech’s mission is to retain women in technology. We intend for this event to build community and add skills to resumes. We encourage anyone who has always wanted to get started with 3D Printing to register for this event! <b>Dates:</b> Aug 25, Sept 1, Sept 8 <b>Time:</b> 5:45pm-8pm (Doors open at 5:30pm and close at 8:30pm, we encourage you to come early and stay late!) <b>Location:</b> Uncorked Studios 1001 SE Water Ave #350 Portland, OR 97214 Registration pays for dinner for all three evenings, along with the class costs. Any amount left over supports ChickTech: High School. A big thank you to our sponsor and event location provider, Uncorked Studios! ChickTech: Career events are open to all genders with a focus on women. → Sign up now, this event has a very limited number of spots! Registration for this event includes all three workshop sessions. You can register for the event via <a href="https://www.eventbrite.com/e/3d-modeling-and-printing-workshop-series-tickets-18089092964">Eventbrite</a> <b>Come to ChickTech’s 3D Printing workshop</b> to get the skills you need to start making 3D models on your own! For three Tuesday evenings in a row, you will be led by an experienced design instructor and focus on building a basic skill set for 3D printing design. Best of all, you'll get to print each session’s project in one of five plastic colors to keep! Technology that will be used: Autodesk Fusion360 and 3D Printers <b>The Instructor: 3D printing designer Mazuir Ross (Maz)</b> Maz sculpted the <a href="http://www.oregonlive.com/multimedia/index.ssf/2015/05/portland_3d_printing_meetup_gr.html">3D printed cow Veronin for Urban Farmer PDX</a>! To learn more about the designer check out her website at <a href="http://www.mazuirross.com/">mazuirross.com</a>. She is also in partnership with Attero, who focuses on the hardware side of 3D printing. You can find information about Maz and Attero’s operation at mazandattero.xyz. <b>Session 1, August 25th: Make a Custom Charm</b> The first session will overview the basics needed for successfully designing 3D printing output, particularly FFF/FDM printing. In the lesson we will create a snap-on custom charm for beer bottles/wine glasses. The creation of the snap-on charm will focus on basics of sketching and creating geometry from sketches. You'll be able to put a word or name on the charm, or even make flowers and/or geometric shapes! <b>Session 2, September 1st: Make a Trinket Box</b> The second session is about modeling a trinket box with a lid. The session will focus on the combining/subtracting and/or intersecting of geometry for modeling. We'll also focus on the concept of fitting tolerances needed for CAM/CNC fabrication, particularly 3D printing. <b>Session 3 September 8th: Make a Six-Panel Hinged Cube with Custom Panel Design</b> In the third session, you'll model a 6-panel hinged cube, including learning how to create fitted hinges. You'll also get creative with the custom designs on each panel. This folding cube can be designed with a sports team logo, a company name, anything you want. It can also be made into a desk trinket to hold pencils/pens/stylus just by cutting out a hole on the top panel. ------------------------------------ <b>By the end of this workshop series</b> you'll have a comprehensive understanding of 3D printing, 3D modeling software, and 3D design. Part of ChickTech’s mission is to retain women in technology. We intend for this event to build community and add skills to resumes. We encourage anyone who has always wanted to get started with 3D Printing to register for this event! <b>Dates:</b> Aug 25, Sept 1, Sept 8 <b>Time:</b> 5:45pm-8pm (Doors open at 5:30pm and close at 8:30pm, we encourage you to come early and stay late!) <b>Location:</b> Uncorked Studios 1001 SE Water Ave #350 Portland, OR 97214 Registration pays for dinner for all three evenings, along with the class costs. Any amount left over supports ChickTech: High School. A big thank you to our sponsor and event location provider, Uncorked Studios! ChickTech: Career events are open to all genders with a focus on women.
Change #35585
2015-08-14
09:24:23

create Calagator::Event 1250468922 3D Modeling and Printing Workshop Series Roll back

description nil → Sign up now, this event has a very limited number of spots! <b>Come to ChickTech’s 3D Printing workshop</b> to get the skills you need to start making 3D models on your own! For three Tuesday evenings in a row, you will be led by an experienced design instructor and focus on building a basic skill set for 3D printing design. Best of all, you'll get to print each session’s project in one of five plastic colors to keep! Technology that will be used: <a href="http://www.autodesk.com/products/fusion-360/overview">Autodesk Fusion360</a> and 3D Printers <b>The Instructor: 3D printing designer Mazuir Ross (Maz)</b> Maz sculpted the <a href="http://www.oregonlive.com/multimedia/index.ssf/2015/05/portland_3d_printing_meetup_gr.html">3D printed cow Veronin for Urban Farmer PDX</a>! To learn more about the designer check out her website at <a href="http://www.mazuirross.com/">mazuirross.com</a>. She is also in partnership with Attero, who focuses on the hardware side of 3D printing. You can find information about Maz and Attero’s operation at mazandattero.xyz. <b>Session 1, August 25th: Make a Custom Charm</b> The first session will overview the basics needed for successfully designing 3D printing output, particularly FFF/FDM printing. In the lesson we will create a snap-on custom charm for beer bottles/wine glasses. The creation of the snap-on charm will focus on basics of sketching and creating geometry from sketches. You'll be able to put a word or name on the charm, or even make flowers and/or geometric shapes! <b>Session 2, September 1st: Make a Trinket Box</b> The second session is about modeling a trinket box with a lid. The session will focus on the combining/subtracting and/or intersecting of geometry for modeling. We'll also focus on the concept of fitting tolerances needed for CAM/CNC fabrication, particularly 3D printing. <b>Session 3 September 8th: Make a Six-Panel Hinged Cube with Custom Panel Design</b> In the third session, you'll model a 6-panel hinged cube, including learning how to create fitted hinges. You'll also get creative with the custom designs on each panel. This folding cube can be designed with a sports team logo, a company name, anything you want. It can also be made into a desk trinket to hold pencils/pens/stylus just by cutting out a hole on the top panel. ------------------------------------ <b>By the end of this workshop series</b> you'll have a comprehensive understanding of 3D printing, 3D modeling software, and 3D design. Part of ChickTech’s mission is to retain women in technology. We intend for this event to build community and add skills to resumes. We encourage anyone who has always wanted to get started with 3D Printing to register for this event! <b>Dates:</b> Aug 25, Sept 1, Sept 8 <b>Time:</b> 5:45pm-8pm (Doors open at 5:30pm and close at 8:30pm, we encourage you to come early and stay late!) <b>Location:</b> Uncorked Studios 1001 SE Water Ave #350 Portland, OR 97214 Registration pays for dinner for all three evenings, along with the class costs. Any amount left over supports ChickTech: High School. A big thank you to our sponsor and event location provider, Uncorked Studios! ChickTech: Career events are open to all genders with a focus on women.
end_time nil → 2015-08-25 20:00:00 -0700
id nil → 1250468922
start_time nil → 2015-08-25 17:30:00 -0700
title nil → 3D Modeling and Printing Workshop Series
url nil → http://chicktech.org/
venue_id nil → 202394815
Change #35584
2015-08-14
08:52:44

create Calagator::Event 1250468921 2015 Portland Creative Conference Roll back

description nil → The Portland Creative Conference is an exploration and celebration of the creative process across various creative industries. This single-track event features presentations from leading creatives who take you inside their creative process and talk about their projects, challenges, influences and inspirations; showing samples of their work along the way. It is an opportunity for attendees to network with other creative industries professionals, get inside the heads of visionary speakers and to be inspired and motivated in entirely new ways, viewing their own world with a fresh perspective as a result. Benefits of attending: >Learn from our industry-leading speakers, enjoy seeing their work and hearing the stories behind it. Network with other creative industries professionals. Leave inspired and motivated in new and unexpected ways.
end_time nil → 2015-09-25 18:00:00 -0700
id nil → 1250468921
start_time nil → 2015-09-25 08:00:00 -0700
title nil → 2015 Portland Creative Conference
url nil → http://www.cre8con.com
venue_details nil → The Gerding Theater at the Armory, was the first building on the National Register of Historic Places—and the first performing arts venue—to achieve a LEED (Leadership in Energy and Environmental Design) Platinum certification. The Gerding Theater seats 590.
venue_id nil → 202389911
Change #35583
2015-08-14
01:43:10

create Calagator::Event 1250468920 PdxDevOps - Stream Processing with Heka Roll back

description nil → Join us for the August meeting of PdxDevOps New Relic is continuing to host us and Volt is continuing to provide pizza. Gluten Free options will be available. Contact Spencer if you have any specific requests. pdxdevops is a Portland, Oregon user group that explores the glorious intersection of software development and systems operations, and shares practical advice on working effectively in an era of agile infrastructure, server automation and cloud computing. The group welcomes participants interested in any related products, technologies and methodologies. The group has been meeting regularly since August 2010 for presentations, demos and discussions applicable to all skill levels, from newbies and experts. Every month 15-35 people come together to share their knowledge, projects and enthusiasm for devops – join us!
end_time nil → 2015-08-17 20:30:00 -0700
id nil → 1250468920
start_time nil → 2015-08-17 18:30:00 -0700
title nil → PdxDevOps - Stream Processing with Heka
url nil → http://pdxdevops.org
venue_id nil → 202392091
Change #35582
2015-08-14
00:51:28

update Calagator::Venue 202393621 Walmart Labs Roll back

events_count 33 → 31
url http://www.fixithere.net/virgin-media-customer-service/ →