PNCA, Room 205 $25 to cult-at-tempusdictum.com

As previously announced this months focused workshop is about prototyping and it is intended to go with a second focused workshop on fabrication (in may). We will go over breadboarding, point to point wiring, breakout boards and a variety of techniques to get your projects prototyped. In the process we will build a "Sanguino" on a breadboard, add the core to our arduino environment, and program it. Then we will look at the next step of putting it on a protoboard. For more information on the "Sanguino" you can look at http://www.sanguino.cc this project was created by the reprap folk who needed more I/O for their projects. I will also be presenting as an example a small (as in tiny) project that I will be doing using breakout boards to make prototyping possible.

The workshop as always will be $25 and participants will walk away with a breadboard and all components necessary to build a bare bones "Sanguino" during the workshop. It will also include other items including a a protoboard and socket to move the design to something more permanent.

It is my hope that in between this months focused workshop and the fabrication workshop people can collectively look at how the hardware design can be improved on (see: similar designs such as laday ada's FuzeBox ( http://www.adafruit.com/index.php?main_page=product_info&products_id=133 ), and the pre-arduino Number 6 board ( http://six.media.mit.edu:8080/6/direction/get-your-board-ready/numberSixStuffed.jpg/view ).

In the fabrication workshop (31May09) we will lay out and etch a board based on this work. Additionally I will follow up the prototyping example from this months workshop by sending the design to be fabricated.

I am sorry that I wasn't able to get this finalized sooner but the extra cult induction kept me busy. Both inductions sessions went extremely well so I think it was worth it..

As usual you can RSVP by paypalling cult /at/ tempusdictum.com